ZYS-P20WD_Surge Protector Device_Products_Shenzhen Zhongyuan Technology Co.,Ltd.

ZYS-P20WD

ZYS-P20WD series surge protector is a transient over-voltage protection device specially used for outdoor LED lighting system. It is mainly composed of protection varistor and gas discharge tube device. It can be installed in LED lamp or perpetual lamp and connected with LED power driver to provide reliable surge protection. It can effectively prolong the service life of lamps and improve the stability of lamps.The protection device must be metal oxide varistor type MOV (Metal Oxide Varistor).

Application: Digital Signage /Traffic Lighting /Flood Lighting/Tunnel Lighting /Street lighting /Wall Lamp/Road Lighting /Parking Lighting /AC-LED Lighting

Agency	Standard	Agency File Number
	EN61643- 11:2012+All	R50600620
	IEC 61643- 11:2011	HU-004562
	IEC 61643- 11:2011	CN23GGVB 001

Features

Applicable to class I or II lamps
Built in protection mode: L-N, L-PE, N-PE

Built in thermal separation function for higher security
Parallel isolation design, excellent protection performance

Excellent surge resistance and very low residual voltage
CCC 1*1.0mm² electronic wire

Small and convenient for embedded installation
IP67 dust proof and waterproof grade

Parameters

Part Number	ZYS-P20WD
Rated working voltage/Un（VAC）	100-277V
Maximum continuous working voltage/MCOV/Uc（VAC）(1)	350V Uc(N-PE)=255V
Rated load current/IL(A)	/
Nominal discharge current/In(kA)(2)	10KA
Maximum Discharge Current/Imax（kA）(3)	20KA
Surge Impulse Voltage/Uoc（KV）	20KV
Voltage Protection Level/Up(V)(4)	L-N/L-G/PE,N-G/PE≤1.8KV
Power Supply System	TN
Waterproof grade	IP67
Work environment	-40°C~+85°C
IEC 61643-11B test classification	Type 2and Type 3

Notes

(1) Maximum continuous working voltage MCOV/UC(VAC): The maximum continuous working voltage continuously applied to the SPD line end
(2) Nominal discharge current (In) (kA): The measured value of SPD withstand capability; the measured value of 15 pulses using 8/20us current waveform.
(3) Maximum discharge current (max) (kA):The maximum discharge current is the measured value of the SPD's maximum withstand capability, and the measured value of 2 pulses using 8/20us current waveform
(4 )Voltage protection level/Up: IEC61643-11 voltage protection level, the maximum residual voltage measured value of the nominal discharge current (ln) under continuous application of 8/20u pulses, is the maximum voltage measured value after one round