ZYS-S10WD_Surge Protector Device_Products_Shenzhen Zhongyuan Technology Co.,Ltd.

ZYS-S10WD

ZYS-S10WD series surge protector is a transient over-voltage protection device specially used for outdoor LED lighting system. It is mainly composed of thermal protection varistor and gas discharge tube device. It can be installed in LED lamp or perpetual lamp and connected with LED power driver to provide reliable surge protection. It can effectively prolong the service life of lamps and improve the stability of lamps and lanterns.The protection device must be metal oxide varistor type MOV (Metal Oxide Varistor).

Agency	Standard	Agency File Number

Features

Applicable to class I or II lamps
Built in protection mode: L-N, L-PE, N-PE

Built in thermal separation function for higher security
Series isolation design, excellent protection performance

Excellent surge resistance and very low residual voltage
Double insulation cable and wire

Small and convenient for embedded installation
IP67 dust proof and waterproof grade

Parameters

Part Number	ZYS-S10WD
Rated working voltage/Un（VAC）	100-277V
Maximum continuous working voltage/MCOV/Uc（VAC）1	320V
Rated load current/IL(A)	5A
Nominal discharge current/In(kA)2	5KA
Maximum Discharge Current/Imax（kA）3	10KA
Surge Impulse Voltage/Uoc（KV）	10KV
Voltage Protection Level/Up(V)4	L- N, L-G/PE,N-G/PE≤1.8KV
Power Supply System	TN
Waterproof grade	IP67
Work environment	-40℃~+85℃
EN 61643-11 test classification	Type 2and 3

Notes

1 Maximum continuous working voltage MCOV/UC(VAC): The maximum continuous working voltage continuously applied to the SPD line end
2 Nominal discharge current (In) (kA): The measured value of SPD withstand capability; the measured value of 15 pulses using 8/20us current waveform.
3 Maximum discharge current (max) (kA):The maximum discharge current is the measured value of the SPD's maximum withstand capability, and the measured value of 2 pulses using 8/20us current waveform
4 Voltage protection level/Up: IEC61643-11 voltage protection level, the maximum residual voltage measured value of the nominal discharge current (ln) under continuous application of 8/20u pulses, is the maximum voltage measured value after one round