ZYS-P10SD/II series surge protector is a transient over-voltage protection device specially used for outdoor LED lighting system. It is mainly composed of protection varistor. It can be installed in LED lamp or perpetual lamp and connected with LED power driver to provide reliable surge protection. It can effectively prolong the service life of lamps and improve the stability of lamp.The protection device must be metal oxide varistor type MOV (Metal Oxide Varistor).
Application: Digital Signage /Traffic Lighting /Flood Lighting/Tunnel Lighting /Street lighting /Wall Lamp/Road Lighting /Parking Lighting /AC-LED Lighting
| Agency | Standard | Agency File Number |
 |
EN61643- 11:2012+All | R50600620 |
 |
IEC 61643- 11:2011 | HU-004562 |
 |
IEC 61643- 11:2011 | CN23GGVB 001 |
Applicable to class I or II lamps
Built in protection mode: L-N
Built in thermal separation function for higher security
Serial isolation design, excellent protection performance
Excellent surge resistance and very low residual voltage
CCC 1*1.0mm² electronic wire
Small and convenient for embedded installation
IP67 dust proof and waterproof grade
| Part Number | ZYS-P10SD/II |
|---|---|
| Rated working voltage/Un（VAC） | 100-277V |
| Maximum continuous working voltage/MCOV/Uc（VAC）(1) | 350V |
| Rated load current/IL(A) | 5A |
| Nominal discharge current/In(kA)(2) | 5KA |
| Maximum Discharge Current/Imax（kA）(3) | 12KA |
| Surge Impulse Voltage/Uoc（KV） | 10KV |
| Voltage Protection Level/Up(V)(4) | L-N≤1.5KV |
| Power Supply System | TN |
| Waterproof grade | IP67 |
| Work environment | -40°C~+85°C |
| IEC 61643-11B test classification | Type 2and Type 3 CLASSII |
| Wire specifications | Wire Length | Stripping Tin | Color |
|---|
Shenzhen Zhongyuan Technology Co.,Ltd.|CopyRight 2015-2025| All Right Reserved
CN
Home > 
